Back Forward SAP Connector Form
Completing the Advanced tab

  1. About 
  2. New 
  3. Service 
  4. Request 
  5. Response 
  1. Faults 
  2. Advanced 
  3. WSDL 
  4. History 
  5. More... 

Use the Advanced tab to change which version of Axis or SOAP is used, to associate a compensating action with the connector, to specify the data transforms that define the schema, and to enable Web Service Security for the SAP connector.

CLIENT PROPERTIES

The PRPC SAP connector architecture uses an Axis client to make the SOAP call and process the SOAP response. Use the fields in this section to specify settings for the Axis client.

Field

Description

Axis Version

Connect SAP rules use AXIS version 2.

SOAP Version

SmartPrompt is available.Specify which version of the SOAP specification is implemented by the Web service this connector communicates with. If you used the Connector and Metadata Accelerator to generate this connector, and selected a SOAP 1.2 binding port, it is set to 1.2.

HTTP Version

SmartPrompt is available.Select a version known to be compatible with the server that this connector is connecting to:

As a best practice, because HTTP Versions are backward compatible, set the HTTP Version to the lowest known compatible version. For example, if it is not known if the server is 1.1 compatible, set the connector HTTP Version to 1.0.

Enable MTOM?

Select to enable the Message Transmission Optimization mechanism for this connector.

WEB SERVICES (WS-*) CONFIGURATION

If your application requires a secure SOAP connection, you can enable Web Services Security (WSS).

Field

Description

Enable WS-Security

Select this option to enable Web Services Security on this connector.

Enable WS-Policy

Select this option if the web service exposes a WS-Policy. Specify the policy using a Webservice Policy data instance to interact with service.

Security Profile

SmartPromptIf Enable WS-Policy is not checked, specify the WS-Security Profile instance to be used to communicate with WS-Security-enabled web services.

This security profile is also used for SSL-enabled SOAP services. In the Security Profile you specify a Truststore which contains the server certificates to be used in the SSL handshake, and a Keystore which stores the client’s private/public key pair used by the server to authenticate the client. See About WS-Security Profile data instances.

Service Policy

SmartPromptIf Enable WS-Policy is checked, specify the Webservices Policy instance to use.

WS-ADDRESSING

The following fields address configuration of the SOAP addressing headers. If you use the Connector and Metadata Accelerator on a Metadata Type WSDL file that contains WS-Addressing data, the fields in this section are pre-populated.

Field

Description

Enable WS-Addressing

Select this option to include routing information in the SOAP header.

Must Understand

Select True to instruct the SOAP service to process this header element and to fail if the element is not recognized. The default is False, allowing all SOAP header elements to be optionally processed by the receiver.

Namespace

SmartPromptThe SmartPrompt lists the standard namespaces from Addressing Final and Submission namespaces. Specify the WS-Addressing namespace to be used in with WS-Addressing and the STS token service. If nothing is specified, http://www.w3.org/2005/08/addressing will be used as the default.

NoteThe WS-Addressing namespace takes precedence over the Dynamic System Setting wsa/versionURI.

Action

Enter the unique identifier for the intent of the request.

This entry in this field should match the SOAPAction Header field if WS-Addressing is enabled, as per section 2.4 of WS-Addressing 1.0 specification for SOAP binding, http://www.w3.org/TR/ws-addr-soap/.

If the SOAP Action is blank, this field's value should be calculated based on the default action pattern mentioned in WS-Addressing specification at http://www.w3.org/TR/2006/WD-ws-addr-wsdl-20060216/#defactionwsdl11.

Use property references to override this field dynamically.

From

Enter information about the message sender.

Reply To

Enter the location the reply for the message should be sent to. If not present, reply is sent back to the endpoint the request came from.

If the server is to respond to the sender synchronously, enter http://www.w3.org/2005/08/addressing/anonymous.

If the message is a one-way request, enter http://www.w3.org/2005/08/addressing/none.

Use property references to override this field dynamically.

Fault To

Provides the fault endpoint reference. Indicate where a fault message should be sent. If not present, the fault is sent back to the endpoint where the request came from.

Use property references to override this field dynamically.

Relates To

Use to relate to a previously sent message, so the service can determine who the sent the message.

Relationship Type

Used in conjunction with the Relates To field, the type of relationship is identified by an absolute IRI. The related message is identified by an absolute IRI that corresponds to the related message's [message id] property. If not otherwise pre-populated:

For Submission Namespace, enter wsa:Reply.

Use property references to override this field dynamically.

Message ID

Assign each message a unique identity. This identity can be used for duplicate detection, message correlation, and many other purposes.

Use property references to override this field dynamically.

SECURE TOKEN SERVICE (STS) CONFIGURATION

Complete these optional fields to use Secure Token Service.

Field

Description

STS Service Policy

SmartPromptOptional. Specify a Webservices Policy instance that uses the policy exposed by Security Token Service.

WS Trust Version

Optional. Select the appropriate WS-trust version to be used to construct the RequestSecurityToken:

  • Version 1.0 corresponds to http://schemas.xmlsoap.org/ws/2005/02/trust
  • Version 1.3 corresponds to
    http://docs.oasis-open.org/ws-sx/ws-trust/200512

For more information on STS configuration, see Configuring WS-Trust in PRPC.

JMS TRANSPORT

If your connector uses a Java Message Service binding to connect to an external service, specify the JMS Transport instance here.

Field

Description

Transport Name

SmartPromptSelect the JMS transport instance used to connect to an external service.

SCHEMA DEFINITIONS

If you used the Connector and Metadata accelerator to generate the SOAP connector rule and the WSDL file of the Web service contains a schema description with complex types, this section of the Advanced tab specifies the data transforms that define the schema of the incoming and outgoing XML objects. (Typically, this indicates that the SOAP operation style is document-literal.)

On the Request and Response tabs, the Data Type of the XML objects described by the data transforms specified on this tab is set to XML Page.

Field

Description

Page Key

add rowIdentify the clipboard page that contains the data values to be mapped to or from the XML object.

Class Name

SmartPrompt is available.Specify the class of that page.

Data Transform

SmartPrompt is available.Specify a data transform to use as the schema description of the XML object.

In most cases, the generated rule specified in this field is appropriate. However, the generated data transforms list every property in the class; you may not want to map a value for every property in the class. If you do not need all the properties, create a new data transform that specifies the properties to map in the order they are to be mapped. Then select that rule in this field.

COMPENSATING ACTION

Advanced featureOptional. Use the Compensating Action and Compensating Action Data section of this tab to associate a compensating action with a work item when the connector rule succeeds. For more information, see Using Compensating Actions, a document on the Integration section of the PDN.

Field

Description

Work Page Name

Optional. Specify the name the page that holds the work item. Typically this is pyWorkPage.

Action
Label

Optional. Enter a string that describes the purpose of the compensating action. For example, "Cancels Flight Reservation." PublicAPI methods can use this label to identify this compensating action within a Java step of an activity.

Action Activity Class Name

SmartPrompt Optional. Identify the Applies to class — first key part — of the activity that performs the compensating action.

Action Activity Name

SmartPrompt Optional. Identify the Activity Name — second key part — of the activity that performs the compensating action.

Compensating
Action Data

add row Optional. Use this section to store information about the current state of the work item as parameter-value pairs when the purpose of running the compensating action activity is to restore the work item to the state it is in directly after the connector rule runs.

Click the none button and enter the name of a parameter used by the compensating action activity. Then, in the value field, select the property that is to be the source of the parameter value.

Up About SAP Connector Rules